上力重工2.5SA内燃型叉车

   
   
   
   
   
   
   
   
   

特性 Characteristic 1 型号Model   CPC20SA/CPCD20SA CPC25SA/CPCD25SA CPC30SA/CPCD30SA 2 动力形式Power type   柴油 Diesel 3 额定载荷Rated capacity kg 2000 2500 3000 4 载荷中心距Load center mm 500 5 起升高度Lift height mm 3000 6 货叉尺寸Fork size L×W×T mm 1070×122×40 1070×125×45 7 门架倾角Mast tilt angle前倾/后倾F/R º 6/12 8 最小转弯半径Turning radius mm 2170 2240 2400 9 最小离地间隙Ground clearance mm 110 120 10 安全架高度　Overhead guard height mm 2070 2090 11 前悬距Fork overhang mm 485 495 性能 Performance 12 最大行驶速度(满载) Max driving speeds (with load) km/h 19.5 20 13 最大起升速度(满载) Max lifting speeds (with load) mm/s 550 450 14 最大爬坡能力　Max grade ability with load % 20 20 尺寸 Dimensions 15 全长（不带货叉）Overall length (without forks) mm 2530 2650 16 全宽Overall width mm 1150 1230 17 货叉最大起升时高度（带挡货架）Overall height fork raised (with backrest) mm 4010 4230 18 门架高度Mast height mm 1995 2075 底盘 Chassis 19 前轮Front tyres   7.00-12-12PR 28×9-15-12PR 20 后轮Rear tyres   6.00-9-10PR 6.50-10-10PR 21 轴距Wheelbase mm 1600 1700 22 轮距Tread 前轮/后轮Front/Rear mm 970/970 1000/970   23 自重Self weight kg 3370 3720 4350 驱动 Drive 24 蓄电池Battery电压/容量Voltage/Capacity V/Ah 12/120 25 发动机 Internal Combustion Engine 型　　号Model   A490BPG A495BPG 26 额定功率Rated output kw/r.p.m 37/2650 39/2500 27 额定扭矩Rated torque N.m/r.p.m 148/1800 168/1800 28 缸　　数No.of cylinde   4 29 排量Displacement L 2.54 2.98 30 燃油箱容量Fuel tank capacity L 60 31 传动 Transmission 档位前/后number of speed F/R   2/2手动换档 (1/1动力换档) Power shift T/M

顶也～～～
   
   
   
   
   
   
   
   
   
   
   
   static/image/common/sigline.gif
   网上设计签名