上力重工3.0SY型叉车

   
   
   
   
   
   
   
   
   

特性 Characteristic 1 型号Model   CPC20SY/CPCD20SY CPC25SY/CPCD25SY CPC30SY/CPCD30SY 2 动力形式Power type   柴油 Diesel 3 额定载荷Rated capacity kg 2000 2500 3000 4 载荷中心距Load center mm 500 5 起升高度Lift height mm 3000 6 货叉尺寸Fork size L×W×T mm 1070×122×40 1070×125×45 7 门架倾角Mast tilt angle前倾/后倾F/R º 6/12 8 最小转弯半径Turning radius mm 2230 2268 2400 9 最小离地间隙Ground clearance mm 100 130 10 安全架高度　Overhead guard height mm 2140 2170 11 前悬距Fork overhang mm 472 477 505 性能 Performance 12 最大行驶速度(满载) Max driving speeds (with load) km/h 20 20 13 最大起升速度(满载) Max lifting speeds (with load) mm/s 480 440 14 最大爬坡能力　Max grade ability with load % 20 20 尺寸 Dimensions 15 全长（不带货叉）Overall length (without forks) mm 2595 2602 2740 16 全宽Overall width mm 1200 1280 17 货叉最大起升时高度（带挡货架）Overall height fork raised (with backrest) mm 4030 4135 18 门架高度Mast height mm 2090 2150 底盘 Chassis 19 前轮Front tyres   7.00-12-12PR 28×9-15-12PR 20 后轮Rear tyres   6.00-9-10PR 6.50-10-10PR 21 轴距Wheelbase mm 1645 1690 22 轮距Tread 前轮/后轮Front/Rear mm 970/950 980/980   23 自重Self weight kg 3500 3800 4400 驱动 Drive 24 蓄电池Battery电压/容量Voltage/Capacity V/Ah 24/60 25 发动机 Internal Combustion Engine 型　　号Model   LD495 (4JG2) 26 额定功率Rated output kw/r.p.m 40/2600 (44.9/2450) 27 额定扭矩Rated torque N.m/r.p.m 174/2000 (186.3/1800) 28 缸　　数No.of cylinde   4 29 排量Displacement L 2.977 (3.059) 30 燃油箱容量Fuel tank capacity L 55 31 传动 Transmission 档位前/后number of speed F/R   2/2手动换档(1/1动力换档) Power shift T/M